TwitterFacebookGoogle PlusLinkedIn

Contact Us! +1-970-493-1901

HPL-2400 Series High Power Load

HPL-2400 Series High Power Load

Selection Guide

 HPL-2400 ModelLoad Value (Impedance)
 HPL-2400-0125  0.0125 Ohm
 HPL-2400-0.250  0.0250 Ohm
 HPL-2400-0.500  0.0500 ohm
 HPL-2400-1.00  1.00 Ohm
 HPL-2400-2.00  2.00 Ohm
 HPL-2400-5.00  5.00 Ohm
 HPL-2400-10.00  10.00 Ohm
Custom Resistances Custom resistances from 0.125 Ohm to 250K Ohm available upon request.


The HPL-2400-0.125 is a water-cooled, low impedance, very low inductance high power load, capable of dissipating up to 2400 Watts.

Fault detection is possible using a six pin connector, with normally open and normally closed feedback. The use of this fault feedback is recommended but not required.

Using the load is simple utilizing either the d-sub connector or ring terminals. The d-sub connector allows the load to be used in pulsed applications with less than 100 nanosecond rise and fall times. Ring terminals can be used for DC applications.

The HPL-2400 is available in seven standard load values including .125, .250, .500, 1, 2, 5 and 10 Ohms. Custom values to 125K Ohms can be configured at the factory in order to directly match specific load characteristics (i.e. a laser diode).


  • 2400 Watt resistive load
  • Very low inductance, which allow fast rise and fall times in pulsed applications
  • Fault detection
  • RoHS compliant



  • Simple strip line or ring terminal connections
  • Compact fully enclosed design



  • Power supply testing
  • Laser diode driver testing